Audiocontrol

31 Oct 18
JC Installs

When you require total control and optimization to achieve great sound quality, AudioControl’s DM-810 Processor is the solution.

The powerful DM-810 processor allows users to truly optimize the performance of their audio system, regardless of whether they are using a factory or aftermarket source, and to truly achieve the goal of “Making Good Sound Great”.

These highly versatile Digital Signal processors are equipped with key features, such as active speaker level inputs, line-level and digital audio inputs, providing up to 10 channels of output. AudioControl’s DM Smart DSP app (available as a free download) contains the power of AudioControl processing through a flexible PC interface packed full of features in a simple lay out. Configure signal summing, 30 bands of equalization, signal time-alignment, input delay and phase correction, plus AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM as well as integrated input and output RTA’s.

The built-in Option Port on the DM-810 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. 

Designed to be the ultimate in sound quality and enhanced audio performance, the DM-810 is our latest AudioControl processor that sets a new standard for sound and what can be achieved in car audio systems.

  • Input and Output RTA for precise and informed tuning
  • GTOTM Signal Sensing
  • MILCTM Clip Detection
  • AccuBASS®
  • Signal Summing
  • Signal Delay
  • 12 and 24 dB/octave crossovers
  • 30 band equalizer
  • DM Smart DSP app available as a free download
  • Optional ACR-3 remote for preset recall and level control

 

MILC

The DM-610 features AudioControls MILC (Maximum Input Level Control) patent-pending source clip detection circuit. MILCTM calculates when the waveform of an incoming audio signal is clipping, and if it is, the LED will fulfil its prime objective and shine forth, aiding in precise level matching control.

 

Option Port

The built-in Option Port on the DM-610 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. Watch this space for future Option Port expansion options.

 

DM Smart DSP

Connect your laptop to the DM-610 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor.

Route any input to any output, adjust gain, delay and polarity then precisely tune the D-4.800 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers.

For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.

With a clear GUI and intuitive workflow, AudioControl’s DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications.

  • Preamp Input Channels: 8
  • Digital Inputs: 1 x Toslink and Coax
  • Input Impedance Preamp / Speaker-level: 20 kΩ / 7 kΩ
  • Preamp Outputs Channels: 10
  • Maximum Output Level: 10 Vrms
  • Output Impedance: 150 Ω
  • Total Harmonic Distortion: 0.01%
  • Frequency Response: 20 Hz to 24 kHz
  • Crossover Frequency: variable
  • Crossover Type: 12 and 24 dB/octave Linkwitz-Riley
  • 12 VDC Remote In
  • 12 VDC Remote Out (always active when the unit is on)
  • Power Supply: High Headroom PWM Switching
  • Current Draw: 1A
  • Recommended Fuse Rating: 3A
31 Oct 18
JC Installs

The powerful DM-608 processor allows users to truly optimize the performance of their audio system, regardless of whether they are using a factory or aftermarket source, and to truly achieve the goal of “Making Good Sound Great”.

These highly versatile Digital Signal processors are equipped with key features, such as active speaker level inputs, line-level and digital audio inputs, providing up to 8 channels of output. AudioControl’s “smart user” interface contains the power of AudioControl processing through a flexible PC interface packed full of features in a simple layout. Configure signal summing, 30 bands of equalization, signal time-alignment, input delay and phase correction, plus AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM as well as integrated input and output RTA’s.

The built-in Option Port on the DM-608 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions.

  • Input and Output RTA for precise and informed tuning
  • GTOTM Signal Sensing
  • MILCTM Clip Detection
  • AccuBASS®
  • Signal Summing
  • Signal Delay
  • 12 and 24 dB/octave crossovers
  • 30 band equalizer
  • DM Smart DSP app available as a free download
  • Optional ACR-3 remote for preset recall and level control

 

MILC

The DM-608 features AudioControls MILC (Maximum Input Level Control) patent-pending source clip detection circuit. MILCTM calculates when the waveform of an incoming audio signal is clipping, and if it is, the LED will fulfil its prime objective and shine forth, aiding in precise level matching control.

 

Option Port

The built-in Option Port on the DM-608 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. Watch this space for future Option Port expansion options.

 

DM Smart DSP

Connect your laptop to the D-4.800 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor.

Route any input to any output, adjust gain, delay and polarity then precisely tune the D-4.800 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers.

For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.

With a clear GUI and intuitive workflow, AudioControl’s DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications.

  • Preamp Input Channels: 6
  • Digital Inputs: 1 x Toslink and Coax
  • Input Impedance Preamp / Speaker-level: 20 kΩ / 7 kΩ
  • Preamp Outputs Channels: 8
  • Maximum Output Level: 10 Vrms
  • Output Impedance: 150 Ω
  • Total Harmonic Distortion: 0.01%
  • Frequency Response: 20 Hz to 24 kHz
  • Crossover Frequency: variable
  • Crossover Type: 12 and 24 dB/octave Linkwitz-Riley
  • 12 VDC Remote In
  • 12 VDC Remote Out (always active when unit is on)
  • Power Supply: High Headroom PWM Switching
  • Current Draw: 1A
  • Recommended Fuse Rating: 3A
30 Oct 18
JC Installs

 

High-power 6 channel dsp matrix amplifier with accubass®

AudioControl has paired our award-winning amplifier technology with our powerful Matrix DSP into the D-6.1200. This single-unit solution provides unprecedented power and tuning flexibility when you require audio perfection from your factory or aftermarket sound system.

The D-6.1200 features active speaker level inputs, line-level inputs and outputs plus, using AudioControl’s DM Smart DSP app gives you complete control over all features including 30 bands of equalization, signal delay, input delay, polarity and AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTMplus integrated input and output RTA’s.

The built in Option Port on the D-6.1200 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions.

Perfect for OEM integration and aftermarket builds, the D-6.1200 packs power and intelligent flexibility into one beautiful cast aluminum chassis.

  • Built-in DSP
  • Configurable as 6/5/4/3 channel amplifier
  • 6 x 200 watts @ 2 ohms
  • 6 x 125 watts @ 4 ohms
  • 400 watts @ 4 ohms bridged
  • AccuBASS® Processing
  • MILC Maximum Input Level Control (Patent Pending)
  • GTOTM Signal Sense
  • Active speaker-level inputs (8 channels) for OEM integration
  • 6 preamp inputs
  • 2 assignable preamp outputs
  • Solid One-Piece Aluminum Chassis
  • DM Smart DSP app available as a free download
  • Input and Output RTA for precise and informed tuning
  • Input and Output Delay
  • 12 and 24 dB/octave Linkwitz-Riley crossovers
  • 30 band equalizer

DM Smart DSP

Connect your laptop to the D-4.800 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor.

Route any input to any output, adjust gain, delay and polarity then precisely tune the D-4.800 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers.

For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.

With a clear GUI and intuitive workflow, AudioControl’s DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications.

30 Oct 18
JC Installs

 

High-power 4 channel DSP matrix amplifier with accubass®

AudioControl has paired our award-winning amplifier technology with our powerful Matrix DSP into the D-4.800. This single-unit solution provides unprecedented power and tuning flexibility when you require audio perfection from your factory or aftermarket sound system.

The D-4.800 features active speaker level inputs, line-level inputs and outputs plus, using AudioControl’s DM Smart DSP app gives you complete control over all features including 30 bands of equalization, signal delay, input delay, polarity and AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTMplus integrated input and output RTA’s.

Perfect for OEM integration and aftermarket builds, the D-4.800 packs power and intelligent flexibility into one beautiful cast aluminium chassis.

  • Built-in DSP
  • Configurable as 4/3/2 channel amplifier
  • 4 x 200 watts @ 2 ohms
  • 4 x 125 watts @ 4 ohms
  • 400 watts @ 4 ohms bridged
  • AccuBASS® Processing
  • MILCTM Maximum Input Level Control (Patent Pending)
  • GTOTM Signal Sense
  • Active speaker-level inputs (6 channels) for OEM integration
  • 4 preamp inputs
  • 2 assignable preamp outputs
  • Solid One-Piece Aluminum Chassis
  • DM Smart DSP app available as a free download
  • Input and Output RTA for precise and informed tuning
  • Input and Output Delay
  • 12 and 24 dB/octave Linkwitz-Riley crossovers
  • 30 band equalizer

Inputs

  • Preamp Inputs: 4 balanced
  • Preamp Input Voltage Range: 250 mV – 8 V RMS
  • Speaker Level Inputs: 6

Outputs

  • Rated Continuous (RMS) Power at 14.4V:
    • 4 Ω – 125 W x 4 RMS
    • 2 Ω – 200 W x 4 RMS
    • Bridged 4 Ω – 400 W RMS
  • Preamp Outputs: 2
  • Maximum Preamp Output: 8.5 V RMS

Performance

  • Frequency Response: 20 Hz – 24 kHz
  • Signal to Noise: 102 dBA, Ref 200 W @ 2 Ohm
  • THD+N: < 0.1%
  • Power / Ground Wire Gauge: 8 to 3 AWG wire
  • Fuse Rating: 2 x 40 A

DM Smart DSP

Connect your laptop to the D-4.800 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor.

Route any input to any output, adjust gain, delay and polarity then precisely tune the D-4.800 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers.

For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.

With a clear GUI and intuitive workflow, AudioControl’s DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications.

30 Oct 18
JC Installs

 

This unique high power design features six active speaker level inputs with summing allowing you to interface and integrate with most factory installed source units. The patent-pending AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance.

More control and features include our GTO signal Sense, Configurable Crossovers and assignable remote level control.

  • Configurable as 4/3/2 channel amplifier
  • 4 x 200 watts @ 2 ohms
  • 4 x 125 watts @ 4 ohms
  • 400 watts @ 4 ohms bridged
  • AccuBASS® Processing
  • MILC™ Maximum Input Level Control (Patent Pending)
  • GTO™ Signal Sense
  • Independent Linkwitz-Riley Alignment crossovers
  • Summable active speaker-level inputs (6 channels) for OEM integration
  • 4 preamp inputs
  • 2 assignable preamp outputs
  • PFM Subsonic Filter
  • Optional ACR-1 assignable remote control
  • Solid One-Piece Aluminum Chassis

Inputs

  • Preamp Inputs: 4 balanced
  • Input Voltage Range: 250 mV – 8 V RMS

Outputs

  • Rated Continuous (RMS) Power at 14.4V:
    • 4 Ω – 125 W x 4 RMS
    • 2 Ω – 200 W x 4 RMS
    • Bridged 4 Ω – 400 W RMS
  • Preamp Outputs: 2
  • Maximum Preamp Output: 8.5 V RMS

Performance

  • Frequency Response: 10 Hz – 30 kHz
  • Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm
  • THD+N: < 0.1%
  • Minimum Power / Ground Wire Gauge: 3 AWG wire
  • Fuse Rating: 2 x 40 A
  • Crossover: Linkwitz-Riley, Adjustable From 30 Hz – 300 Hz
30 Oct 18
JC Installs

 

High-power mono subwoofer amplifier

When you demand the perfect blend of power and performance, AudioControl provides answers and the LC-1.800 is no exception.

No matter the install, you can be assured power will meet and exceed expectations with 800 watts at 2 ohms. The mix of high level and low-level inputs mean you have the widest input voltage range in the industry. AudioControl’s patented AccuBASS® circuit is the only way to properly overcome factory bass roll-off and heavily equalized factory bass settings.

Enjoy loud, clean and articulate bass combined with the best warranty available with the LC-1.800 amplifier.

  • Subwoofer amplifier with patented AccuBASS®
  • 800 watts @ 2 ohms
  • 500 watts @ 4 ohms
  • AccuBASS® Processing
  • MILC™ Maximum Input Level Control (Patent Pending)
  • GTO™ Signal Sense
  • 24 dB/octave Linkwitz-Riley Alignment crossover
  • Speaker level and preamp inputs
  • Optional ACR-1 assignable remote control
  • Solid One-Piece Aluminum Chassis

Inputs

  • Preamp Inputs: 2 balanced
  • Input Voltage Range: 500 mV – 6 Vrms

Outputs

  • Rated Continuous (RMS) Power at 14.4V:
    • 4 Ω – 500 W RMS
    • 2 Ω – 800 W RMS

Performance

  • Frequency Response: 10 Hz – 30 kHz
  • Signal to Noise: 102 dBa, Ref 500 W @ 4 Ohm
  • Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz
  • THD+N: < 0.01%
  • Minimum Power / Ground Wire Gauge: 3 AWG wire
  • Fuse Rating: 2 x 40 A
  • Crossover: 24 dB/octave Linkwitz-Riley, Adjustable From 30 Hz – 230 Hz
  • PFM Subsonic Filter: 24 Hz
30 Oct 18
JC Installs

 

Four channel micro amplifier

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure “Making Good Sound Great” can happen in any installation.

Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting.

  • 4 x 75 watts @ 2 ohms
  • 4 x 50 watts @ 4 ohms
  • 150 watts @ 4 ohms bridged
  • GTOTM Signal Sense
  • Active speaker-level inputs for OEM integration
  • RCA Line Inputs
  • Linkwitz-Riley Crossover
  • Reversible Cover Plate

Inputs

  • Preamp Inputs: 4 Balanced
  • Preamp Input Voltage Range: 500 mV – 6 V RMS
  • Speaker Level Inputs: 4

Outputs

  • Rated Continuous (RMS) Power at 14.4V:
    • 4 Ω – 50 W x 4 RMS
    • 2 Ω – 75 W x 4 RMS
    • Bridged 4 Ω – 150 W RMS

Performance

  • Frequency Response: 10 Hz – 22 kHz
  • Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm
  • THD+N: < 0.01%
  • Power / Ground Wire Gauge: 10 to 4 AWG wire
  • Fuse Rating: 1 x 30 A
  • Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass
  • PFM Subsonic Filter: 32 Hz
30 Oct 18
JC Installs

 

Monoblock micro amplifier with accubass®

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure “Making Good Sound Great” can happen in any installation.

Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting.

  • 300 watts @ 2 ohms
  • 175 watts @ 4 ohms
  • AccuBASS® Processing
  • GTOTM Signal Sense
  • Active speaker-level inputs for OEM integration
  • RCA Line Inputs
  • Linkwitz-Riley Crossover
  • Optional ACR-1 assignable remote control
  • Reversible Cover Plate
  • Bulletproof 5-year warranty

Inputs

  • Preamp Inputs: 2 Balanced
  • Preamp Input Voltage Range: 500 mV – 6 V RMS
  • Speaker Level Inputs: 2

Outputs

  • Rated Continuous (RMS) Power at 14.4V:
    • 4 Ω – 175 W RMS
    • 2 Ω – 300 W RMS

Performance

  • Frequency Response: 10 Hz – 22 kHz
  • Signal to Noise: 102 dBA, Ref 175 W @ 4 Ohm
  • THD+N: < 0.01%
  • Power / Ground Wire Gauge: 10 to 4 AWG wire
  • Fuse Rating: 1 x 30 A
  • Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass
  • PFM Subsonic Filter: 24 Hz
23 Oct 18
david susilo UNCENSORED

I don’t like driving. I find it to be a chore. So the only way for me to cope with the stress of driving is to have a good audio system. Factory basic audio systems are often not ideal, so I usually upgrade my cars’ system using gear from companies like Clarion ProAudio, Alpine, and […]

19 Oct 18
Hvare Khshaeta

AudioControl Concert AVR-6 7.1 Channel Home Theater Receiver; New / Open Box – Buy – AudioControl Concert AVR-6 7.1 Channel Home Theater Receiver; New / Open Box

18 Oct 18
Alexandre Beaudoin Bonotto Blog's

Silver Winner: Ultra-Modern Amenities Artfully Enhance NYC Residence For this project that Rich AV Design outfitted on New York City’s Upper West Side, the owner had purchased three units for renovation into one and wanted a Savant system solution similar to the one in family’s existing home, only with some extra technology. The integrator collaborated […]

17 Sep 18
Hvare Khshaeta

AudioControl Concert AVR-6 7.1 Channel Home Theater Receiver; New / Open Box – Buy – AudioControl Concert AVR-6 7.1 Channel Home Theater Receiver; New / Open Box

15 Sep 18
AVNation

AudioControl unveils their new amp that gives residential dealers the power to deploy 70-volt in outdoor or commercial integrations.

28 Aug 18
The super blog 9449

When investing a fantastic deal time within the motor vehicle, getting a excellent audio course of action could possibly aid make drives more pleasant. Changing car radio for sale – 203 Car Audio an auto’s audio treatment is likely to be extremely-priced. Nevertheless, auto proprietors who would like to Construct their specific wholesale vehicle audio […]

27 Aug 18
Convergent AV

AudioControl, makers of innovative high-performance audio solutions for the residential, commercial and automotive markets will be expanding their amplifier offerings with the introduction of their new CM line of 70-volt amplifiers along with other important new product introductions detailed below at CEDIA Expo 2018, booth 2937. AudioControl’s made-in-USA 70-volt amplifier solutions, delivering 750 watts per […]