Avet Reels

17 Jun 19
Tight Lines

Seaquester will be hard to beat in both Mako Fever and Mako Mania after weighing in Saturday. John Schachel of the Jersey Coast Shark Anglers reported a 402-pounder weighed in by John Marotta — and that mako was then weighed at 397 pounds at Capt. Bill’s Landing in Point Pleasant for the Point Pleasant Charter […]

26 Apr 19
Boatswain's Beach

The Avet SXJ is at the pinnacle of the drag 릴게임 먹튀. Typically, the drag reel is significantly less difficult to use than pretty much some other kind of reel, for instance, baitcaster, spincaster and notwithstanding turning sort of reel for execution. In the event that you purchase a baitcaster reel you have to claim or […]

26 Apr 19
Ipsos Apoyo BloG

The Avet SXJ is at the pinnacle of the drag 릴게임 먹튀. Regularly, the drag reel is significantly easier to use than pretty much some other kind of reel, for instance, baitcaster, spincaster and notwithstanding turning sort of reel for execution. In the event that you purchase a baitcaster reel you have to possess or purchase […]

21 Apr 19
Times and Tides of a Beachwriter

I always worry the huge cymbals are going to go flying backwards into the audience

11 Apr 19
Duran's Fishing Products

The Okuma Makaira reel clamp is a replacement reel clamp that comes with an oversize slot to place hooks, lures, and leashes. It fit Makaira 15-50. It is precision machined out of aircraft grade 6061 aluminum and the anodized to prevent corrosion. Laser etched logo on the clamp adds the finishing touch to the clamp. […]

06 Apr 19
Duran's Fishing Products

The AVET JX/LX reel clamp is a replacement reel clamp that comes with an oversize slot to place hooks, lures, and leashes. It is precision machined out of aircraft grade 6061 aluminum and the anodized to prevent corrosion. Laser etched logo on the clamp adds the finishing touch to the clamp. Does not come with […]

05 Apr 19
Duran's Fishing Products

The patent pending DFP Clamp is the most versatile clamping system technology in the market today. Confirmed fitment of over 40+ reels. All components of the DFP Clamp are precision CNC machined out of aircraft grade billet 6061 aluminum making the single frame design strong and sturdy. The slots allow the post to slide allowing the clamp to fit on a variety of reel and rod combos. All components contain 3D machined surfaces that allow for more contact with the reel foots and rods providing stronger clamping force. The anodized finished provides resistance to wear and give it an amazing look. Laser etched logo on the clamp to add the final touch to the DFP Clamp.

The Ulua model is set to fit the bigger style rods. Designed specifically for the Ulua style rods it solves all the problems that were associated with the big butt Ulua’s. This clamping system now allows you to mount reels onto your Ulua that weren’t possible before without modifying the clamping. No more grinding screws buying new screws or using hose clamps! The single frame is thicker and has more clearance to be able to adapt to just as many reels as the other sizes. The clamp on the bottom also has deeper serrations and is wider to  provide more surface contact on the rod.

Fits on Trinidad A 14-40, Trinidad Gold 14-40, Avet LX/JX/HX, Torium 14-40, Penn Fathoms, Saltist & Saltiga 15-40, Penn Fathoms and more!!

Please Check our guide to make sure it fits your set up

Max Rod Diameter is 1 1/2 Min Rod Diameter is 1 1/4

**Does not fit baitcaster style reels**

**Custom lasering upon request email for quote**

Click here for installation Instructions

Click here to find out if this fits your rod/reel setup Durans Fishing Products Fitment Guide

10 Mar 19
The Fish Wrap Writer

Don Anderson and Peter Vican talk stripers and a changing environment with RISAA members. Block Island has an allure like no other. It offers regular ferry service, beaches without insulting parking charges, almost endless empty stretches of shoreline after dark plus a history of big stories about big striped bass and until recently, lots of […]

05 Mar 19
Kayak Angler

In 1964, documentary filmmaker Bruce Brown took two young surfers and the whole world on a year-long journey to follow the summer sun and find tasty waves. The result was the epic film, Endless Summer. For the 2019 Destination Guide, Kayak Angler magazine is taking you on a year-round, around-the-continent fishing trip following warm water and […]

04 Mar 19
Duran's Fishing Products

The patent pending DFP Clamp is the most versatile clamping system technology in the market today. Confirmed fitment of over 40+ reels. All components of the DFP Clamp are precision CNC machined out of aircraft grade billet 6061 aluminum making the single frame design strong and sturdy. The slots allow the post to slide allowing the clamp to fit on a variety of reel and rod combos. All components contain 3D machined surfaces that allow for more contact with the reel foots and rods providing stronger clamping force. The anodized finished provides resistance to wear and give it an amazing look. Laser etched logo on the clamp to add the final touch to the DFP Clamp.

The Large model is set to fit the bigger style rods. The single frame is thicker and has more clearance to be able to adapt to just as many reels as the Standard DFP Clamp. When you fish with these bigger style rods heavier lines will be used and the DFP Clamp will handle it no problem!

Fits on Trinidad A 14-40, Trinidad Gold 14-40, Avet LX/JX/HX, Torium 14-40, Penn Fathoms, Saltist & Saltiga 15-40, Penn Fathom, Okuma Tesoro and more.

Please Check our guide to make sure it fits your set up

Max Rod Diameter is 1 1/4 Min Rod Diameter is 1 1/8

**Does not fit baitcaster style reels**

Click here for installation Instructions 

Click here to find out if this fits your rod/reel setup Durans Fishing Products Fitment Guide

31 Jan 19
Duran's Fishing Products

The patent pending DFP Clamp is the most versatile clamping system technology in the market today. Confirmed fitment of over 40+ reels. All components of the DFP Clamp are precision CNC machined out of aircraft grade billet 6061 aluminum making the single frame design strong and sturdy. The slots allow the post to slide allowing the clamp to fit on a variety of reel and rod combos. All components contain 3D machined surfaces that allow for more contact with the reel foots and rods providing stronger clamping force. The anodized finished provides resistance to wear and give it an amazing look. Also the symetrical design allows it to fit lefty reels as well! Laser etched logo on the clamp to add the final touch to the DFP Clamp.

Fits on Trinidad A 14-40, Trinidad Gold 14-50, Torium 14-50, Avet LX/JX/HX, Shimano Tranx 400-500 Tyronos 8-12, Okuma Metaloid 5-12, Mak 8-15, Tesoro 8-12, Komodo 463 471Daiwa Saltist and Saltiga 15-40, Lexa 400, Penn Fathoms Squall and Torque and more!!

Compatible Rods

All Calstar GFDH Deck handrods

Phenix PHD, PSW , and SMX Rods

All United Composite Jig Sticks

**Hook Holder may cause discomfort while casting or fishing depending on your fishing stlye**

**DO NOT OVERTIGHTEN SCREWS MAY CRUSH BLANK OR BEND FRAME**

**Custom lasering upon request email for quote**

Click here for installation Instructions

Click here to find out if this fits your rod/reel setup Durans Fishing Products Fitment Guide

https://www.youtube.com/watch?v=4dJgKZrQoaQ

30 Jan 19
Duran's Fishing Products

The AVET SX/MX reel clamp is a replacement reel clamp that comes with an oversize slot to place hooks, lures, and leashes. It is precision machined out of aircraft grade 6061 aluminum and the anodized to prevent corrosion. Laser etched logo on the clamp adds the finishing touch to the clamp. Does not come with […]

10 Jan 19
Seven Stripes

Targeting stripers from the kayak was my first love; cruising and sightfishing the flats, drifting softbaits through the rips, trolling the tube and worm, chasing schools of blitzing bass on the outgoing tide.

02 Dec 18
站点标题

J&H Tackle is a trusted seller of Avet reels. Avet has been producing some of the best and most dependable reels across the United States for the past ten years. The wide-ranging products of Avet reels encompass the needs of anglers who are into inshore fishing and those who are big game offshore champions. Proudly […]

03 Oct 18
站点标题

Avet reels is a known manufacturer for those who fish in saltwater. They have been in the market for over a decade now and they specialize in lever drag reels. J&H Tackle offers their latest line of products including those that come with magnetic cast control. You will be able to control your cast and […]

06 Sep 18
Tight Lines

Capt. Dave De Gennaro fished the mid-range offshore areas with his Hi-Flier from Barnegat on the weekend and his party managed to jig a yellowfin tuna before the skipper anchored up to chunk. When a hit came, it didn’t seem like a tuna and the fish soon revealed itself to be a white marlin.  Though […]